hvlp_net_logo

FUJI SYSTEMS


The Mini-Mite™ 3X Model - NEW!

Fuji recognized that although there were plenty of lower priced HVLP turbine systems on the market today, none combined top quality with all the features demanded by professionals. Features such as a powerful 3-stage Turbine Motor, Non-Bleed Spraygun with Stainless Steel Fluid Components. Plus extra features such as Air Control Valve and High-Efficiency Aircap for even less overspray and an all-metal Turbine Case.

buy_now_buttonmini_mite_3_hvlp_system

It is often thought that the reason that most people purchase an HVLP system is for speed, but we have found that the main reason is really the desire for a high quality of finish. Of course, any spray system is a few times faster than brushing - admittedly, even a cheap version will give you speed. But for quality of finish, you do need power (3-stage minimum) and a high quality spraygun with all the features. Please read the information on our Components Page where these features are described. This will help give you the knowledge you need to make an educated decision. Also, please take a look at our Frequently Asked Questions (FAQ) page. Click HERE to view the FAQ.

The Mini-Mite 3X™ system replaces the Fuji Super Pro model which was a real favorite with cabinet makers and professionals for well almost 2 decades. Fuji installs the same powerful 3-stage Ametek-Lamb Electric turbine motor as used in the Super Model. The Mini-Mite 3X™ (MM3X) is a professional system with a standard 3-stage turbine. By 'standard' we mean that the turbine does not have the patented noise-reduction feature as seen on the Fuji Q-Series. However the noise level is no more than any other standard HVLP turbine (from any other manufacturer). The MM3X Turbine develops approximately 6psi. This is more than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings.

Note* The model number label is located on the base of the turbine case.

Spray cabinets, furniture, autos or pianos - in fact, anything wood or metal. A powerful, portable system for all fine-finishing.

The Mini-Mite™ 4 Model - NEW!

The MM4 system uses the most powerful 4-stage turbine on the market (same as the Q4 PRO). This system is recommended for those who want the extra power available. As with the MM3, there is no noise reduction feature, so this should be taken into account if noise level is a factor in your workplace.

buy_now_buttonmini_mite_4_hvlp_system

What's included with every Fuji Mini-Mite™ System?

The Turbine, Spraygun with 1 Qt (1000cc) Cup, 25ft Hose with Quick-Connect, Air Control Valve, User Manual, Viscosity Cup, Wrench, Cleaning Brush. In other words... everything except the paint.

Mini-Mite 3™ SPECIFICATIONS

Model Mini-Mite™ 3 Mini-Mite™ 4
Spraygun XT-2 Model
pipa_graphic
Aircap Set .055" (1.4mm)
pipa_graphic
Fluid Components Stainless Steel
pipa_graphic
Cup Capacity 1 Quart (1000cc)
pipa_graphic
Cup Type Quick Release
pipa_graphic
Hi-Flex™ Hose 25ft (7.6m)
pipa_graphic
Motor Type 3-Stage 4-Stage
Motor Model 120v Ametek 116765 Ametek 119292
Motor Model 220-240v Ametek 117123 Ametek 117246
Air Filters (2) Washable
pipa_graphic
Turbine Dimensions 11" x 8.6" x 8.1"
pipa_graphic
Metric Dimensions 28cm x 22cm x 20.5cm
pipa_graphic
System Weight 26.5lbs (12kg) 27.5lbs (12.5kg)
Warranty 24 Months - Parts & Labor
pipa_graphic


The Q3 PRO™ Model - QUIET!

The Q3 PRO™ system is identical to the Super Model with the added feature of noise-reduction. The Fuji noise reduction method is patented in the USA. Research & Development was conducted by engineering staff at Carleton University in Canada under a partial Government grant program. Noise is reduced by over 50% making this the quietest 3-stage turbine available today. The Q3 PRO™ 3-stage turbine develops approximately 6psi. This system is ideal for Cabinet Makers and Furniture Refinishers. Perfect for any type of fine-finishing.

buy_now_buttonq3_hvlp_system

The Q4 PRO™ Model - QUIET!

For Paint Contractors spraying Latex House Paints most of the time and for those persons who simply want the best, Fuji introduced a more powerful, 4-stage HVLP Turbine System. The Q4 PRO™ 4-stage turbine develops approximately 20% more psi than the 3-stage, allowing for less thinning of paints. Fuji installs the exact same 4-stage Ametek-Lamb Electric turbine motor used by all other HVLP makers. The Q4 PRO™ Turbine is perfect for fine-finishing of cabinets, furniture, automobiles as well as heavy-duty painting projects.

buy_now_buttonq4_hvlp_system

What's included with every Fuji Q-Series PRO™ System?

The Turbine, Spraygun with Cup, 25ft Hose with Quick-Connect, Air Control Valve, User Manual, Viscosity Cup, Wrench, Cleaning Brush. In other words... everything except the paint.

Please go to The Components Page to see more details about what goes into each system.

Q-PRO™ SERIES SPECIFICATIONS

Model Q3 PRO™ Q4 PRO
Spraygun XT-2 Model
pipa_graphic
Aircap Set .055" (1.4mm)
pipa_graphic
Fluid Components Stainless Steel
pipa_graphic
Cup Capacity 1 Quart (1000cc)
pipa_graphic
Cup Type Quick Release
pipa_graphic
Hi-Flex™ Hose 25ft (7.6m)
pipa_graphic
Motor Type 3-Stage 4-Stage
Motor Model 120v Ametek 116765 Ametek 119292
Motor Model 220-240v Ametek 117123 Ametek 117246
Air Filter (1) Washable
pipa_graphic
Turbine Dimensions 14.5" x 11.5" x 9 "
pipa_graphic
Metric Dimensions 36cm x 29cm x 23cm
pipa_graphic
System Weight 39lbs (18kg) 40lbs (18kg)
Warranty 24 Months - Parts & Labor
pipa_graphic

 

Home | What is HVLP? | HVLP History | HVLP Systems | The Components
Parts & Accessories | Technical Page | Company & Privacy Policy | Contact Us | WebStore


Copyright© HVLP.NET 2008 All Rights Reserved.