9001-3 Aircap Set 3H

High-Efficiency #3H/Spraytans Combination Aircap perfect for shading and for some water-based coatings.

List Price: $69.95 | Our Price: $54.95 | You Save: $15.00

9001-4 Aircap Set 4H

This is the standard #4H Aircap Set installed in your Fuji spraygun so you should not need to order this.

List Price: $69.95 | Our Price: $54.95 | You Save: $15.00

9001-5 Aircap Set 5H

High-Efficiency #5H Aircap Set for more coverage with larger areas. Also works well with the Gravity GX-2 spraygun for more output.

List Price: $69.95 | Our Price: $54.95 | You Save: $15.00

9001-6 Aircap Set 6H

High-Efficiency #6H Aircap Set for more coverage with larger areas such as walls & ceilings.

List Price: $69.95 | Our Price: $54.95 | You Save: $15.00

2037-5 Cup Gaskets

Only for use with the newer cup assembly (2042) that uses the diaphragm. For Old SC-1 Gaskets please see OLD PARTS

List Price: $17.00 | Our Price: $15.00 | You Save: $2.00

2038 Plastic Diaphragms

Available in a 3-pack. The diaphragm is the best solution for keeping paint out of the pressure tube.

List Price: $11.75 | Our Price: $9.75 | You Save: $2.00

2039 Cup Parts Kit

3 each of the pressure tubes, cup gaskets and the plastic diaphragms. These are the 'wearable' parts that you should have on hand.

List Price: $22.85 | Our Price: $21.05 | You Save: $1.80

9045 Cleaning Brush

Identical to the bristle cleaning brush that comes with every Fuji System.

List Price: $3.75 | Our Price: $2.65 | You Save: $1.10

1001 Wrench

Lost your Fuji wrench? Here's a replacement. For fluid nozzle and packing nut adjustment.

List Price: $6.20 | Our Price: $2.65 | You Save: $0.55

9903-3 Caps for Cups

Available in a 3-pack. These caps fit all Fuji 1000cc (1qt) cups. Great for storing paint.

List Price: $4.00 | Our Price: $2.97 | You Save: $1.03

3050 Viscosity Cup

Identical to viscosity cup that is part of every Fuji system. Durable plastic. Please note* this cup is a different size to the Ford or Zahn.

List Price: $3.55 | Our Price: $2.80 | You Save: $0.75

9044 Nylon Paint Strainer

Available in a 2-pack. Fits at the end of the metal fluid tube. Not necessary if you already strain the paint.

List Price: $3.00 | Our Price: $1.99 | You Save: $1.01

2024-5 Pressure Tubes

Available in a 5-pack. Tubes include the one-way check valve to prevent paint entering the spray gun.

List Price: $16.75 | Our Price: $14.75 | You Save: $2.00

8069 Miniature Stainless Gravity Cup

2ozs (75cc) Gravity Cup can be used with any of our gravity spray guns. As seen on 9300-G75. Perfect for auto-touch up.

List Price: $49.99 | Our Price: $39.00 | You Save: $10.99

9110-G2B Conversion Kit

Everything you need to quickly convert your GT-X2 gravity spraygun to 1 Quart Pressure Cup.

List Price: $52.95 | Our Price: $47.95 | You Save: $5.00

9111-B2G Conversion Kit

Everything you need to quickly convert your XT-2 pressure cup spraygun to 400cc Gravity Cup.

List Price: $52.95 | Our Price: $47.95 | You Save: $5.00

2042 1 Quart Cup Assembly

We recommend upgrading to this cup assembly if your older Fuji cup does not have the 2038 diaphragm.

List Price: $64.00 | Our Price: $34.50 | You Save: $29.50

2041 Non-Teflon Quart Cup

Recommended for everything except some water-based coatings that may stain the cup.

List Price: $36.00 | Our Price: $20.00 | You Save: $16.00

2041T Teflon-Coated Quart Cup

Better to use this with some corrosive water-based coatings. Not for use with Nitro-Cellulose Lacquers.

List Price: $38.00 | Our Price: $22.00 | You Save: $16.00

9080 Mini 3-Cup Set

Perfect size for guitars, auto bumper touch-up or any small project- replaces 1 quart cup.

List Price: $49.95 | Our Price: $42.75 | You Save: $7.20

2049F Whip Hose

Add this hose between the gun and the standard 25ft hose for more flexibility. Also, air temperature through the gun is reduced by 15 degrees.

List Price: $34.99 | Our Price: $29.99 | You Save: $5.00

9049 Extra 25ft Hose

Extra 25ft hose for those that need it. Comes with Brass Quick-Connect and Air Control. Maximum total length of hose is 50ft.

List Price: $73.00 | Our Price: $62.00 | You Save: $11.00

7011 Extension Hose 8ft

Adding this hose to the standard 25ft hose helps cool the air that travels through the gun and prevents lacquer drying too fast.

List Price: $32.99 | Our Price: $19.99 | You Save: $13.00

5029 Q-Filter

It's a good idea to have one spare filter so you can rotate them after cleaning. Fits all Q3 & Q4 and newer PRO Models.

List Price: $6.95 | Our Price: $5.95 | You Save: $1.00

4009 Mini-Mite Filters

Filters only fit the Mini-Mite turbine cases. Sold in Pairs. For older 'Super' Model, please go to OLD MODEL

List Price: $7.99 | Our Price: $5.99| You Save: $2.00