|
9001-3 Aircap Set 3H
3H Aircap Set for older XT & GXT spray guns only (2003 - 2009) perfect for shading and for some water-based coatings.
List Price: $69.95 | Our Price: $54.95 | You Save: $15.00 |
|
|
9001-4 Aircap Set 4H
This is the standard #4H Aircap Set installed in the older Fuji XT spraygun so you should not need to order this.
List Price: $69.95 | Our Price: $54.95 | You Save: $15.00 |
|
|
9001-5 Aircap Set 5H
High-Efficiency #5H Aircap Set for more coverage with larger areas. Also works well with the Gravity GXT-2 spraygun for more output.
List Price: $69.95 | Our Price: $54.95 | You Save: $15.00 |
|
|
9001-6 Aircap Set 6H
High-Efficiency #6H Aircap Set for more coverage with larger areas such as walls & ceilings. For older XT sprayguns only.
List Price: $69.95 | Our Price: $54.95 | You Save: $15.00 |
|
|
2006 - Gun Block
Gun Block for older model SC-1 Spray gun. Includes Needle Packing and Packing Nut.
List Price: $39.00 | Our Price: $24.90 | You Save: $14.10 |
|
|
2018-19 Fluid Screw Nut Combo
Fluid Screw Nut and 2019 Fluid Adjusting Screw. The Fluid Adjusting Screw is Black Anodized Aluminum
List Price: $18.00 | Our Price: $13.00 | You Save: $5.00 |
|
|
2001 Spraycap
Spraycap (Collar) for SC-1 Spray gun. Please note* this part will not fit the newer XT Spray Guns (order 8001 instead).
List Price: $9.00 | Our Price: $6.85 | You Save: $2.15 |
|
|
2027 Nozzle Plate/Spring
Nozzle Plate with Spring attached - cannot be used with our newer XT Spray Guns.
List Price: $11.05 | Our Price: $9.00 | You Save: $2.05 |
|
|
2022 Fluid Coupler
Fluid Coupler for Older SC-1 Spray Gun. Cannot be used on our newer XT Spray Guns.
List Price: $11.50 | Our Price: $9.00 | You Save: $2.50 |
|
|
2020-21 Trigger Pin Combo
Delrin Trigger Pin and Trigger Pin Bushing combo. After replacing, add a little oil to the contact point behind the trigger.
List Price: $9.25 | Our Price: $6.75 | You Save: $2.50 |
|
|
3001-2 Aircap Set
Air Nozzle, Needle and Fluid Jet .7 mm This is the finest size for the old SC-1 spraygun. Does not fit newer XT Gun.
List Price: $69.95| Our Price: $54.95 | You Save: $15.00 |
|
|
3001-3 Aircap Set
Air Nozzle, Needle and Fluid Jet 1 mm This set was standard with the old SC-1 spraygun. Does not fit newer XT Gun.
List Price: $69.95| Our Price: $54.95 | You Save: $15.00 |
|
|
3001-4 Needle, Nozzle, Jet
Air Nozzle, Needle and Fluid Jet 1.4mm. Perfect for Lacquers and fine-finish quality Latex House Paint. Does not fit newer XT.
List Price: $69.95 | Our Price: $54.95 | You Save: $15.00 |
|
|
3001-5 Needle, Nozzle, Jet
Air Nozzle, Needle and Fluid Jet 2mm. Perfect for more fluid output and Latex House Paint onto walls. Does not fit newer XT.
List Price: $69.95 | Our Price: $54.95 | You Save: $15.00 |
|
 |
3001-6 Needle, Nozzle, Jet
Air Nozzle, Needle and Fluid Jet 2mm. Perfect for more fluid output and Latex House Paint onto walls. Does not fit newer XT.
List Price: $69.95 | Our Price: $54.95 | You Save: $15.00 |
|
|
2036-5 Gaskets (Thick)
Thick Gaskets are chemical resistant and long-lasting. Only for use with older Fuji cup assemblies (not with new 2042 cup assembly).
List Price: $17.00 | Our Price: $15.00 | You Save: $2.00 |
|
|
2044-2 Super Turbine Filters
Turbine Filters for the older, Super Turbine. Will not fit new (2009+ Super GOLD turbine).
List Price: $10.00 | Our Price: $7.20 | You Save: $2.80 |
|
|
2042 Cup Assembly
This cup assembly uses the newer 2037 Thin Gaskets and the 2038 Plastic Diaphragm. We recommend to upgrade to this cup.
List Price: $64.00 | Our Price: $34.50 | You Save: $29.50 |
|
|
